Brennenstuhl Gateway GWY mit Homebridge ansteuern

So jetzt das Gateway endlich da, eingerichtet, Schalter zugeordnet und programmiert, die Confic. geändert, eingepflegt und gespeichert, keine Fehlermeldung, doch HB stoppt, wer weiß Rat ???

IP Adresse vom Gateway stimmt, habe den Namen vom Gateway auf GWY 433 geändert, hilft auch nicht.

Übers Smartphone kann ich die einzelnen Schalter ansteuern.

Edit. Gerade lief er kurz, doch es waren weiteren keine Geräte aufgeführt. Und wenn ich den Server neu starte, werden einige Schalter angesteuert

[10/7/2019, 7:15:27 PM] Homebridge is running on port 51826.

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting guest WLAN state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610317048 state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610317048 temperature

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting thermostat 117950750480 temperature

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting thermostat 117950750480 heating state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting thermostat 117950750480 target heating state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting thermostat 117950750480 target temperature

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting thermostat 117950750480 battery status

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610280648 state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610280648 temperature

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610284249 state

[10/7/2019, 7:15:30 PM] [FRITZBox7490] Getting outlet 087610284249 temperature

[10/7/2019, 7:16:19 PM] [FRITZBox7490] Updating guest WLAN

[10/7/2019, 7:16:19 PM] [FRITZBox7490] Getting guest WLAN state

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Updating outlet 087610284249

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610284249 state

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610284249 power usage

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610284249 in use

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610284249 energy consumption

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610284249 temperature

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Updating outlet 087610317048

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610317048 state

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610317048 power usage

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610317048 in use

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610317048 energy consumption

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610317048 temperature

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Updating outlet 087610280648

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610280648 state

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610280648 power usage

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610280648 in use

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610280648 energy consumption

[10/7/2019, 7:16:26 PM] [FRITZBox7490] Getting outlet 087610280648 temperature

[10/7/2019, 7:16:27 PM] [FRITZBox7490] Updating thermostat 117950750480

[10/7/2019, 7:16:27 PM] [FRITZBox7490] Getting thermostat 117950750480 temperature

[10/7/2019, 7:16:27 PM] [FRITZBox7490] Getting thermostat 117950750480 target temperature

[10/7/2019, 7:16:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery level

[10/7/2019, 7:16:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery status

[10/7/2019, 7:17:19 PM] [FRITZBox7490] Updating guest WLAN

[10/7/2019, 7:17:19 PM] [FRITZBox7490] Getting guest WLAN state

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Updating outlet 087610284249

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610284249 state

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610284249 power usage

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610284249 in use

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610284249 energy consumption

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610284249 temperature

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Updating outlet 087610317048

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610317048 state

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610317048 power usage

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610317048 in use

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610317048 energy consumption

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610317048 temperature

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Updating outlet 087610280648

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610280648 state

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610280648 power usage

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610280648 in use

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610280648 energy consumption

[10/7/2019, 7:17:26 PM] [FRITZBox7490] Getting outlet 087610280648 temperature

[10/7/2019, 7:17:27 PM] [FRITZBox7490] Updating thermostat 117950750480

[10/7/2019, 7:17:27 PM] [FRITZBox7490] Getting thermostat 117950750480 temperature

[10/7/2019, 7:17:27 PM] [FRITZBox7490] Getting thermostat 117950750480 target temperature

[10/7/2019, 7:17:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery level

[10/7/2019, 7:17:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery status

[10/7/2019, 7:18:19 PM] [FRITZBox7490] Updating guest WLAN

[10/7/2019, 7:18:19 PM] [FRITZBox7490] Getting guest WLAN state

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Updating outlet 087610284249

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610284249 state

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610284249 power usage

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610284249 in use

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610284249 energy consumption

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610284249 temperature

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Updating outlet 087610317048

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610317048 state

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610317048 power usage

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610317048 in use

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610317048 energy consumption

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610317048 temperature

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Updating outlet 087610280648

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610280648 state

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610280648 power usage

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610280648 in use

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610280648 energy consumption

[10/7/2019, 7:18:26 PM] [FRITZBox7490] Getting outlet 087610280648 temperature

[10/7/2019, 7:18:27 PM] [FRITZBox7490] Updating thermostat 117950750480

[10/7/2019, 7:18:27 PM] [FRITZBox7490] Getting thermostat 117950750480 temperature

[10/7/2019, 7:18:27 PM] [FRITZBox7490] Getting thermostat 117950750480 target temperature

[10/7/2019, 7:18:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery level

[10/7/2019, 7:18:27 PM] [FRITZBox7490] Getting thermostat 117950750480 battery status

[10/7/2019, 7:18:45 PM] [Config] Changes to config.json saved.

[10/7/2019, 7:18:48 PM] [Config] Homebridge restart request received

[10/7/2019, 7:18:49 PM] [Config] Executing restart command: sudo -n systemctl restart homebridge

homebridge : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl restart homebridge

pam_unix(sudo:session): session opened for user root by (uid=0)

[10/7/2019, 7:18:49 PM] Got SIGTERM, shutting down Homebridge...

Stopping Node.js HomeKit Server...

homebridge.service: Main process exited, code=exited, status=143/n/a

homebridge.service: Failed with result 'exit-code'.

Stopped Node.js HomeKit Server.

homebridge.service: Found left-over process 808 (homebridge-conf) in control group while starting unit. Ignoring.

This usually indicates unclean termination of a previous run, or service implementation deficiencies.

homebridge.service: Found left-over process 855 (sh) in control group while starting unit. Ignoring.

This usually indicates unclean termination of a previous run, or service implementation deficiencies.

homebridge.service: Found left-over process 856 (sudo) in control group while starting unit. Ignoring.

This usually indicates unclean termination of a previous run, or service implementation deficiencies.

homebridge.service: Found left-over process 861 (systemctl) in control group while starting unit. Ignoring.

This usually indicates unclean termination of a previous run, or service implementation deficiencies.

Started Node.js HomeKit Server.

pam_unix(sudo:session): session closed for user root

[10/7/2019, 7:18:56 PM] Loaded config.json with 7 accessories and 2 platforms.

[10/7/2019, 7:18:56 PM] ---

[10/7/2019, 7:18:56 PM] Loaded plugin: homebridge-brematic

[10/7/2019, 7:18:56 PM] Registering accessory 'homebridge-brematic.Brematic'

[10/7/2019, 7:18:56 PM] ---

[10/7/2019, 7:18:56 PM] Loaded plugin: homebridge-config-ui-x

[10/7/2019, 7:18:56 PM] Registering platform 'homebridge-config-ui-x.config'

[10/7/2019, 7:18:56 PM] ---

[10/7/2019, 7:18:56 PM] Loaded plugin: homebridge-fritz

[10/7/2019, 7:18:57 PM] Registering platform 'homebridge-fritz.Fritz!Box'

[10/7/2019, 7:18:57 PM] ---

[10/7/2019, 7:18:57 PM] Loading 2 platforms...

[10/7/2019, 7:18:57 PM] [Config] Initializing config platform...

[10/7/2019, 7:18:57 PM] [Config] Spawning homebridge-config-ui-x with PID 885

[10/7/2019, 7:18:57 PM] [ FritzBox7490] Initializing Fritz!Box platform...

[10/7/2019, 7:18:57 PM] [ FritzBox7490] Deprecated `hide` setting is ignored. Use `devices` instead

[10/7/2019, 7:18:57 PM] Loading 7 accessories...

[10/7/2019, 7:18:57 PM] [ großes Licht ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ großes Licht ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ großes Licht ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ großes Licht ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ großes Licht ] Target state: false

[10/7/2019, 7:18:57 PM] [ großes Licht ] großes Licht - getServices

[10/7/2019, 7:18:57 PM] [ Wohnwand] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ Wohnwand] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ Wohnwand] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ Wohnwand] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ Wohnwand] Target state: false

[10/7/2019, 7:18:57 PM] [ Wohnwand] Wohnwand - getServices

[10/7/2019, 7:18:57 PM] [ Vitrine ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ Vitrine ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ Vitrine ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ Vitrine ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ Vitrine ] Target state: false

[10/7/2019, 7:18:57 PM] [ Vitrine ] Vitrine - getServices

[10/7/2019, 7:18:57 PM] [ kleines Licht ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ kleines Licht ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ kleines Licht ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ kleines Licht ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ kleines Licht ] Target state: false

[10/7/2019, 7:18:57 PM] [ kleines Licht ] kleines Licht - getServices

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Target state: false

[10/7/2019, 7:18:57 PM] [ Spiegelschrank ] Spiegelschrank - getServices

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Target state: false

[10/7/2019, 7:18:57 PM] [ Flurlicht ] Flurlicht - getServices

[10/7/2019, 7:18:57 PM] [ Brunnen ] Initializing Brematic accessory...

[10/7/2019, 7:18:57 PM] [ Brunnen ] Initializing Brematic Gateway ...

[10/7/2019, 7:18:57 PM] [ Brunnen ] Generic Driver loaded ...

[10/7/2019, 7:18:57 PM] [ Brunnen ] Setting address configuration ...

[10/7/2019, 7:18:57 PM] [ Brunnen ] Target state: false

[10/7/2019, 7:18:57 PM] [ Brunnen ] Brunnen - getServices

[10/7/2019, 7:18:58 PM] [ FritzBox7490] Initializing Fritz!Box platform accessories failed - wrong user credentials?

[10/7/2019, 7:19:02 PM] [Config] Homebridge Config UI X v4.6.1 is listening on :: port 8080

Ich habe zwischendurch die andere Config geladen. damit überhaupt etwas bei uns geht. Habe dann für das Protokoll die neue wieder eingeladen....

Kann mir keiner helfen und laut dem Protokoll sagen, wo es hängt

ok, das ist mir auch aufgefallen, wusste aber nicht, ob das was zu bedeuten hat. Was kann das sein ??

Ich habe mir beide Configurationen in einem Worddokument abgespeichert, ich werde mal beide User Namen vergleichen, vielleicht hat sich der Fehlerteufel eingeschlichen

Ich habe jetzt wohl gesehen, dass der Benutzername FritzBox7490 klein geschrieben und in der FritzBox groß, habe das nun geändert, HB pausiert aber immer noch. Ich bin z.Z. unterwegs, wenn ich dann wieder zu Hause bin, werde ich mal beide Konfigurationen, einmal nur die „FritzBox“ die ohne Fehler läuft und dann die mit dem Brennerstuhl Getway hier posten, könnt ihr das dann mal bitte kontrollieren, vielleicht findet ihr den Fehler, ich möchte letztendlich nur, dass es läuft, dann habt ihr Ruhe vor mir.

Mit der läuft es super

{
    "bridge": {
        "name": "Homebridge",
        "username": "CC:22:3D:E3:CE:31",
        "port": 51826,
        "pin": "031-45-154"
    },
    "description": "Home Smart Home",
    "platforms": [
        {
            "platform": "config",
            "name": "Config",
            "port": 8080,
            "auth": "form",
            "theme": "red",
            "restart": "sudo -n systemctl restart homebridge",
            "temp": "/sys/class/thermal/thermal_zone0/temp",
            "sudo": true,
            "log": {
                "method": "custom",
                "command": "journalctl -o cat -n 500 -f -u homebridge"
            }
        },
        {
            "platform": "Fritz!Box",
            "name": "FRITZBox7490",
            "username": "Smart_Home",
            "password": "xxxxxx",
            "url": "http://192.168.178.1",
            "interval": 60,
            "hide": [
                "wifi",
                "<ain>"
            ],
            "concurrent": false,
            "wifiName": "jockel&pinky",
            "options": {
                "strictSSL": false
            }
        }
    ],
    "accessories": []
}

diese macht Probleme

{
    "bridge": {
        "name": "Homebridge",
        "username": "CC:22:3D:E3:CE:31",
        "port": 51826,
        "pin": "031-45-154"
    },
    "description": "Home Smart Home",
    "platforms": [
        {
            "platform": "config",
            "name": "Config",
            "port": 8080,
            "auth": "form",
            "theme": "red",
            "restart": "sudo -n systemctl restart homebridge",
            "temp": "/sys/class/thermal/thermal_zone0/temp",
            "sudo": true,
            "log": {
                "method": "custom",
                "command": "journalctl -o cat -n 500 -f -u homebridge"
            }
        },
        {
            "platform": "Fritz!Box",
            "name": " FRITZBox7490",
            "username": " Smart_Home ",
            "password": " xxxxxx",
            "url": "http://192.168.178.1",
            "interval": 60,
            "hide": [
                "wifi",
                "<ain>"
            ],
            "concurrent": false,
            "wifiName": "jockel&pinky",
            "options": {
                "strictSSL": false
            }
        }
    ],
    "accessories": [
        {
            "accessory": "Brematic",
            "name": " großes Licht ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "10011",
                "unitCode": "10000"
            }
        },
        {
            "accessory": "Brematic",
            "name": " Wohnwand",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "10011",
                "unitCode": "01000"
            }
        },
        {
            "accessory": "Brematic",
            "name": " Vitrine ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "10011",
                "unitCode": "00100"
            }
        },
        {
            "accessory": "Brematic",
            "name": " kleines Licht ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "10011",
                "unitCode": "00010"
            }
        },
        {
            "accessory": "Brematic",
            "name": " Spiegelschrank ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "01111",
                "unitCode": "10000"
            }
        },
        {
            "accessory": "Brematic",
            "name": " Flurlicht ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "01111",
                "unitCode": "01000"
            }
        },
        {
            "accessory": "Brematic",
            "name": " Brunnen ",
            "host": "192.168.178.33",
            "port": 49880,
            "vendor": "Brennenstuhl",
            "device": "GWY 433",
            "address": {
                "systemCode": "01111",
                "unitCode": "01100"
            }
        }
    ]
}

kann keiner helfen

Zitat von sschuste

Hast du tatsächlich Leerzeichen vor und hinter Smart_Home und ein Leerzeichen vor xxxxxx? Ungewöhnlich.

Stefan

Bei der z.Z. laufenden Config sind keine Lehrzeichen, bei der, die pausiert, sind Leerzeichen, vielleicht ist das der Fehler, warum es nicht läuft, werde es gleich testen

Hey super, du hast eine Adlerauge......

Jetzt muss ich nur noch gucken, ob ich die Schalter in Home integrieren kann.....

Es läuft, Es läuft, Es läuft, Es läuft jiiiipiiiiiieeee, danke danke, danke

Ok, die Schalter sind jetzt alle in "Home" integriert, doch so richtig über "Siri" funktioniert es nicht. Beim "Einschalten" klappt es, doch wenn die Schalter wieder ausgeschaltet werden sollen, bleiben manche an.....

Zitat von Junior

Oder mal das Kommando ändern. Was sagst Du denn zu Siri?

Ich sage Siri, schalte den Brunnen ein (so wie der Schalter heißt und in der config programmiert ist ), dann geht er an, sage ich wiederum, schalte den Brunnen aus, geht er nicht aus. Über die App „Stecker Pro“ kann ich den Brunnen ausschalten.

Ich habe auch Szenen erstellt, wie z.B. „gute Nacht“ wo alle Lampen und auch der Brunnen ausgehen soll, geht er auch nicht aus.

Auch der Schalter „Wohnwand“ geht über das Kommando „Siri, Schalte die Wohnwand ein“, geht sie an, jedoch bei schalte sie aus, geht sie nicht aus.

Andere Schalter, gehen wiederum über ein Kommando oder eine Szene an und auch wieder aus.

Ich habe mir jetzt mal bessere Schalter von Brennenstuhl bestellt, mal sehen ob es sich ändert.