hab ich gerade versucht leider ohne erfolg hoffe ich hab alles richtig gemacht tut mir leid dass ich ich soviel fragenstelle und mich irgendwie auch sehr anstelle
ZitatAlles anzeigenpi@homebridge:~ $ sudo systemctl stop deconz
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
pi@homebridge:~ $ wget https://deconz.dresden-elektro…pBeeII_0x26720700.bin.GCF
--2021-11-11 15:52:15-- https://deconz.dresden-elektro…pBeeII_0x26720700.bin.GCF
Resolving deconz.dresden-elektronik.de (deconz.dresden-elektronik.de)... 144.76.96.194
Connecting to deconz.dresden-elektronik.de (deconz.dresden-elektronik.de)|144.76.96.194|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 164241 (160K) [application/octet-stream]
Saving to: ‘deCONZ_RaspBeeII_0x26720700.bin.GCF’
deCONZ_RaspBeeII_0x 100%[===================>] 160.39K --.-KB/s in 0.07s
2021-11-11 15:52:15 (2.38 MB/s) - ‘deCONZ_RaspBeeII_0x26720700.bin.GCF’ saved [164241/164241]
pi@homebridge:~ $ sudo systemctl stop ModemManager
pi@homebridge:~ $ sudo GCFFlasher_internal -t 60 -f deCONZ_RaspBeeII_0x26720700.bin.GCF
GCFFlasher V3_17 (c) dresden elektronik ingenieurtechnik gmbh
Reboot device RaspBee (RaspBee)
deCONZ firmware version 26690700
failed reset 19996
action: reset device RaspBee
wiringPi 2.52 initialized
Reboot device RaspBee (RaspBee)
action: reset device RaspBee
Bootloader version 0x00030003, app crc: 0x93C2CD88
flashing 164227 bytes: |=Reboot device RaspBee (RaspBee)
action: reset device RaspBee
Reboot device RaspBee (RaspBee)
action: reset device RaspBee
retry, failed
pi@homebridge:~ $ -x3
-bash: -x3: command not found
pi@homebridge:~ $ wget -O deconz-latest-beta.deb https://deconz.dresden-elektro…ta/deconz-latest-beta.deb
--2021-11-11 15:54:29-- https://deconz.dresden-elektro…ta/deconz-latest-beta.deb
Resolving deconz.dresden-elektronik.de (deconz.dresden-elektronik.de)... 144.76.96.194
Connecting to deconz.dresden-elektronik.de (deconz.dresden-elektronik.de)|144.76.96.194|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6556648 (6.3M) [application/octet-stream]
Saving to: ‘deconz-latest-beta.deb’
deconz-latest-beta. 100%[===================>] 6.25M 7.54MB/s in 0.8s
2021-11-11 15:54:30 (7.54 MB/s) - ‘deconz-latest-beta.deb’ saved [6556648/6556648]
pi@homebridge:~ $ sudo dpkg -i deconz-latest-beta.deb
(Reading database ... 108143 files and directories currently installed.)
Preparing to unpack deconz-latest-beta.deb ...
Important: /boot/cmdline must not contain console=serial0 (RaspBee only)
use raspi-config to configure serial port access as described in user manual (RaspBee only)
Attention: To install missing dependencies and finish the installation please run:
sudo apt install -f
Unpacking deconz (2.13.02-raspbian-buster-beta) over (2.12.06-raspbian-buster-stable) ...
dpkg: dependency problems prevent configuration of deconz:
deconz depends on libqt5qml5; however:
Package libqt5qml5 is not installed.
dpkg: error processing package deconz (--install):
dependency problems - leaving unconfigured
Processing triggers for mime-support (3.62) ...
Errors were encountered while processing:
deconz
pi@homebridge:~ $
pi@homebridge:~ $ sudo systemctl start deconz
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.